Malleable Iron Pipe Fittings

Product standards:

   BS EN 10242:1995, DIN EN 10242:1995 ASME B16.3-2016, ASME B16.14-2013, ASME B16.39-2014

Maintenance :

1. Before normal use, the test pressure should be tested according to the corresponding test pressure. If the thread leakage phenomenon is found, the tube clamp can be used to continue tightening the 1-2 buckle(circle)

2. The end face of the steel pipe connected to the pipe fftting must be ffush, the thread should not be slanted, and there should be no ellipse or bending phenomenon, otherwise the pipe will not be straight after connection.

3. When tightening with wrench, pay attention to the card to prevent the product from being broken due to screwing of the square side. The best installation method is to ffx the pipe fftting and twist the steel pipe to ensure the product is not damaged.